Classic

Reproductions for your classic BMW.

Make sure your original stays original: The original condition of your classic BMW can only be preserved with Original BMW Parts. And this is why you will still be able to get the reproduction parts you need. Newly produced or reissued parts can be found here.

To quickly jump to a specific production line (e.g. E12) simply use the search function your browser provides (usually opened pressing Strg/command + F) and fill out the search field with the respective production line.

Reproductions for E3.

BMW E3

E3

When BMW introduced the BMW E3, it was a completely new type of full-sized vehicle. Between 1968 and 1977, it rolled off the production lines with various engine types over 220,000 times, striking a unique figure on the roads with its sleek, ultra-modern design. Several models belong to the E3 series: 2.8L, 2500, 2800, 2800Bav, 3.0L, 3.0S, 3.0SBav, 3.0Si, 3.3L and 3.3Li.

BMW Classic reproduction covering upper part

Covering upper part

Part number:
52 10 1853353 (left)
52 10 1853354 (right)

Seat covering for the reclining seat system in anthracite. The upper part of the seat covering hides the mechanism of the seat back.

BMW Classic reproduction hazard warning switch

Hazard warning switch

Part number:
61 31 1353428 (ECE version)
61 31 1355358 (US version)
61 31 1356193 (US version)

In the event of a breakdown, the hazard warning switch centrally activates all turn indicators to safeguard the breakdown area.

BMW Classic reproduction latch striker

Latch striker

Part number:
51 21 1852263 (left)
51 21 1852264 (right)

The latch striker is attached to the body of the vehicle. The door lock fits into the latch striker.

BMW Classic reproduction tailpipe trim chrome

Tailpipe trim chrome

Part number:
82 11 9413972 (42 mm)
18 11 1102632 (55 mm)

The tailpipe trim embellishes the rear exhaust pipe.

Reproductions for E9.

BMW E9

E9

The performance of the BMW 3.0 CSi is characterised by its powerful 3-litre six-cylinder engine and electronically controlled Bosch petrol injection. The luxuriously equipped car still makes an impression today. The series includes the following models: 2.5CS, 2800CS, 3.0CS, 3.0CSi, 3.0CSiL and 3.0CSL.

BMW Classic reproduction cup for trim frames

Cup for trim frames

Part number:
51 31 7740158

The cup is the connection between the left and right trim frames on the pane.

BMW Classic reproduction hazard warning switch

Hazard warning switch

Part number:
61 31 1353428 (ECE version)

In the event of a breakdown, the hazard warning switch centrally activates all turn indicators to safeguard the breakdown area.

BMW Classic reproduction latch striker

Latch striker

Part number:
51 21 1852263 (left)
51 21 1852264 (right)

The latch striker is attached to the body of the vehicle. The door lock fits into the latch striker.

BMW Classic reproduction tailpipe trim chrome

Tailpipe trim chrome

Part number:
18 11 1102632 (55 mm)

The tailpipe trim embellishes the rear exhaust pipe.

BMW Classic reproduction turn indicator base

Turn indicator base

Part number:
63 13 1811103 (left)
63 13 1811104 (right)

The turn indicator base is the seal between the indicator and the indicator lens, and protects the indicator from water.

Reproductions for E12.

BMW E12

E12

The BMW E12 is the first BMW of the 5 Series. This model succeeded the “New Class” and was produced from summer 1972 to mid-1981. It marked the start of BMW’s reconceptualisation of model names. The E12 series includes the models 518, 518i, 520, 520i, 525, 528, 528i, 530i and 535i.

BMW Classic reproduction clamp for sun roof roof liner

Clamp for sunroof roof liner

Part number:
54 12 1848635

The clamp is used to attach the headliner frame to the sunroof cover.

BMW Classic reproduction cover

Cover

Part number:
51 21 1869919

Cover on the inside of the door above the door brake.

BMW Classic reproduction covering upper part

Covering upper part

Part number:
52 10 1853353 (left)
52 10 1853354 (right)

Seat covering for the reclining seat system in anthracite. The upper part of the seat covering hides the mechanism of the seat back.

BMW Classic reproduction door pocket

Door pocket

Part number:
51 41 1854725

The door pocket is screwed to the door trim and serves as a storage compartment for the customer.

BMW Classic reproduction guide tube

Guide tube

Part number:
11 11 1705786

The dipstick is inserted in the guide tube to measure the engine oil level. Length: 387.4 mm.

BMW Classic reproduction holding strap

Holding strap

Part number:
71 11 1179443

The holding strap keeps the toolbox in a horizontal position when opened.

BMW Classic reproduction latch striker

Latch striker

Part number:
51 21 1852263 (left)
51 21 1852264 (right)

The latch striker is attached to the body of the vehicle. The door lock fits into the latch striker.

BMW Classic reproduction sliding jaw

Sliding jaw

Part number:
54 12 1933550

The sliding jaws on the sunroof are used to guide the sunroof cover in the sliding rails.

BMW Classic reproduction stopper

Stopper

Part number:
51 23 1831316

Stopper for the bonnet.

BMW Classic reproduction tailpipe trim chrome

Tailpipe trim chrome

Part number:
82 11 9413973 (42 mm)
82 11 9413972 (42 mm)
82 11 9413968 (46 mm)
18 11 1102632 (55 mm)
82 11 9413970 (79x62 mm)

The tailpipe trim embellishes the rear exhaust pipe.

Reproductions for E21.

BMW E21

E21

In July 1975, BMW presented the first 3 Series as the successor to the 02 Series. The series introduced the first iteration of a driver-oriented cockpit, which forms an arc around the driver’s seat. The E21 series consists of the following models: 315, 316, 318, 318i, 320, 320i and 323i.

BMW Classic reproduction clamp for sunroof roof liner

Clamp for sunroof roof liner

Part number:
54 12 1848635

The clamp is used to attach the headliner frame to the sunroof cover.

BMW Classic reproduction covering upper part

Covering upper part

Part number:
52 10 1853353 (left)
52 10 1853354 (right)

Seat covering for the reclining seat system in anthracite. The upper part of the seat covering hides the mechanism of the seat back.

BMW Classic reproduction door pocket

Door pocket

Part number:
51 41 1854725

The door pocket is screwed to the door trim and serves as a storage compartment for the customer.

BMW Classic reproduction guide tube

Guide tube

Part number:
11 11 1705786

The dipstick is inserted in the guide tube to measure the engine oil level. Length: 387.4 mm.

BMW Classic reproduction holding strap

Holding strap

Part number:
71 11 1179443

The holding strap keeps the toolbox in a horizontal position when opened.

BMW Classic reproduction latch striker

Latch striker

Part number:
51 21 1852263 (left)
51 21 1852264 (right)

The latch striker is attached to the body of the vehicle. The door lock fits into the latch striker.

BMW Classic reproduction sliding jaw

Sliding jaw

Part number:
54 12 1933550

The sliding jaws on the sunroof are used to guide the sunroof cover in the sliding rails.

BMW Classic reproduction stopper

Stopper

Part number:
51 23 1831316

Stopper for the bonnet.

BMW Classic reproduction tailpipe trim chrome

Tailpipe trim chrome

Part number:
82 11 9413967 (51 mm)

The tailpipe trim embellishes the rear exhaust pipe.

BMW Classic reproduction tailpipe trim chrome

Tailpipe trim chrome

Part number:
82 11 9413973 (42 mm)
82 11 9413970 (79x62 mm)

The tailpipe trim embellishes the rear exhaust pipe.

Reproductions for E23.

BMW E23

E23

May 1977 marked the launch of the first model in BMW’s new premier class, the BMW 7 Series. Luxuriously equipped like no other car before, its state-of-the-art technologies laid the foundation for all subsequent 7 Series models. The following models belong to the E23 series: 728, 728i, 728iS, 730, 732i, 733i, 735i, 745i.

BMW Classic reproduction actuator central locking system (front door)

Actuator central locking system (front door)

Part number:
51 26 1373183

The actuator controls the door lock when the central locking system is used.

BMW Classic reproduction clamp for sunroof roof liner

Clamp for sunroof roof liner

Part number:
54 12 1848635

The clamp is used to attach the headliner frame to the sunroof cover.

BMW Classic reproduction cover

Cover

Part number:
51 21 1869919

Cover on the inside of the door above the door brake.

BMW Classic reproduction covering upper part

Covering upper part

Part number:
52 10 1853353 (left)
52 10 1853354 (right)

Seat covering for the reclining seat system in anthracite. The upper part of the seat covering hides the mechanism of the seat back.

BMW Classic reproduction door pocket

Door pocket

Part number:
51 41 1854725

The door pocket is screwed to the door trim and serves as a storage compartment for the customer.

BMW Classic reproduction holding strap

Holding strap

Part number:
71 11 1179443

The holding strap keeps the toolbox in a horizontal position when opened.

BMW Classic reproduction latch striker

Latch striker

Part number:
51 21 1852263 (left)
51 21 1852264 (right)

The latch striker is attached to the body of the vehicle. The door lock fits into the latch striker.

BMW Classic reproduction sliding jaw

Sliding jaw

Part number:
54 12 1933550

The sliding jaws on the sunroof are used to guide the sunroof cover in the sliding rails.

BMW Classic reproduction tailpipe trim chrome

Tailpipe trim chrome

Part number:
82 11 9413973 (42 mm)
82 11 9413968 (46 mm)

The tailpipe trim embellishes the rear exhaust pipe.

Reproductions for E24.

BMW E24

E24

The BMW 6 Series (E24) was the successor to the large coupés such as the 3.0 CS. Its aerodynamic body was offered in just one variant. The elegant, elongated design still cuts an extremely sporty figure today. The E24 series includes the following models: 628CSi, 630CS, 630CSi, 633CSi, 635CSi, as well as the M6 and M635CSi.

BMW Classic reproduction actuator central locking system (front door)

Actuator central locking system (front door)

Part number:
51 26 1373183

The actuator controls the door lock when the central locking system is used.

BMW Classic reproduction clamp for sunroof roof liner

Clamp for sunroof roof liner

Part number:
54 12 1848635

The clamp is used to attach the headliner frame to the sunroof cover.

BMW Classic reproduction handle

Handle

Part number:
52 10 1904964

The handle of the seat back adjustment lever allows the user to fold it down and access the rear.

BMW Classic reproduction hazard warning switch

Hazard warning switch

Part number:
61 31 1363406

In the event of a breakdown, the hazard warning switch centrally activates all turn indicators to safeguard the breakdown area.

BMW Classic reproduction holding strap

Holding strap

Part number:
71 11 1179443

The holding strap keeps the toolbox in a horizontal position when opened.

BMW Classic reproduction latch striker

Latch striker

Part number:
51 21 1852263 (left)
51 21 1852264 (right)

The latch striker is attached to the body of the vehicle. The door lock fits into the latch striker.

BMW Classic reproduction sliding jaw

Sliding jaw

Part number:
54 12 1933550

The sliding jaws on the sunroof are used to guide the sunroof cover in the sliding rails.

BMW Classic reproduction tailpipe trim black

Tailpipe trim black

Part number:
82 11 9401505 (55 mm)

The tailpipe trim embellishes the rear exhaust pipe.

BMW Classic reproduction tailpipe trim chrome

Tailpipe trim chrome

Part number:
82 11 9413974 (42 mm)
82 11 9401504 (55 mm)
82 11 9413968 (46 mm)
82 11 9413967 (51 mm)

The tailpipe trim embellishes the rear exhaust pipe.

BMW Classic reproduction tailpipe trim chrome

Tailpipe trim chrome

Part number:
82 11 9413972 (42 mm)

The tailpipe trim embellishes the rear exhaust pipe.

Reproductions for E26.

BMW E26

E26

Between 1978 and 1981, 453 BMW M1s were built. In every respect, the iconic M1 mid-engined sports car occupies a special place in BMW’s automotive history. With its 277 hp, the street version was the most powerful sports car of its time.

BMW Classic reproduction latch striker

Latch striker

Part number:
51 21 1852263 (left)
51 21 1852264 (right)

The latch striker is attached to the body of the vehicle. The door lock fits into the latch striker.

Reproductions for E28.

BMW E28

E28

The second generation of the BMW 5 Series was launched in 1981, further optimising the saloon’s aerodynamic values by raising the rear section. It was also the world’s first vehicle to display fuel consumption values for all six-cylinder engine variants. The E28 series includes the following models: 518, 518i, 520i, 525e, 525i, 528e, 528i, 533i, 535i, as well as the M5 and M535i.

BMW Classic reproduction clamp for sunroof roof liner

Clamp for sunroof roof liner

Part number:
54 12 1848635

The clamp is used to attach the headliner frame to the sunroof cover.

BMW Classic reproduction clasp for backrest (rear, M-Technic)

Clasp for backrest (rear, M-Technic)

Part number:
52 20 1927590

The clasp featuring an M-Technic design is the distinguishing feature of the typical M-Technic interior.

BMW Classic reproduction cover

Cover

Part number:
51 21 1869919

Cover on the inside of the door above the door brake.

BMW Classic reproduction covering upper part

Covering upper part

Part number:
52 10 1853353 (left)
52 10 1853354 (right)

Seat covering for the reclining seat system in anthracite. The upper part of the seat covering hides the mechanism of the seat back.

BMW Classic reproduction door pocket

Door pocket

Part number:
51 41 1854725

The door pocket is screwed to the door trim and serves as a storage compartment for the customer.

BMW Classic reproduction guide tube

Guide tube

Part number:
11 11 1705786

The dipstick is inserted in the guide tube to measure the engine oil level. Length: 387.4 mm.

BMW Classic reproduction guide tube

Guide tube

Part number:
11 43 1287549

The dipstick is inserted in the guide tube to measure the engine oil level.

BMW Classic reproduction holding strap

Holding strap

Part number:
71 11 1179443

The holding strap keeps the toolbox in a horizontal position when opened.

BMW Classic reproduction sliding jaw

Sliding jaw

Part number:
54 12 1933550

The sliding jaws on the sunroof are used to guide the sunroof cover in the sliding rails.

BMW Classic reproduction tailpipe trim chrome

Tailpipe trim chrome

Part number:
82 11 9413972 (42 mm)
82 11 9413974 (42 mm)
82 11 9413968 (46 mm)
82 11 9413967 (51 mm)
82 11 9413970 (79x62 mm)

The tailpipe trim embellishes the rear exhaust pipe.

Reproductions for E30.

BMW E30

E30

To this day, the BMW 3 Series is still the most widely produced and, thanks to its numerous variants, a true all-rounder. In 1982, the series introduced a two-door saloon, then it was offered as a four-door model from 1983. The models 316, 316i, 318i, 318is, 320i, 320is, 323i, 325e, 325i, 325ix and the M3 belong to the E30 series.

BMW Classic reproduction actuator central locking system (front door)

Actuator central locking system (front door)

Part number:
51 26 1373183

The actuator controls the door lock when the central locking system is used.

BMW Classic reproduction clamp for sunroof roof liner

Clamp for sunroof roof liner

Part number:
54 12 1848635

The clamp is used to attach the headliner frame to the sunroof cover.

BMW Classic reproduction clasp for backrest (rear, M-Technic)

Clasp for backrest (rear, M-Technic)

Part number:
52 20 1927590

The clasp featuring an M-Technic design is the distinguishing feature of the typical M-Technic interior.

BMW Classic reproduction covering plate

Covering plate

Part number:
41 11 1966553 (left)

41 11 1966554 (right)

The covering plate is located at the front right and left above the engine mount, closing toward the front in the area of the front mask.

BMW Classic reproduction cup for trim frames (rear window)

Cup for trim frames (rear window)

Part number:
51 31 1937440

The cup is the connection between the left and right decorative frames on the pane.

BMW Classic reproduction guide tube

Guide tube

Part number:
11 43 1311677

The dipstick is inserted in the guide tube to measure the engine oil level. Length: 269 mm.

BMW Classic reproduction guide tube

Guide tube

Part number:
11 11 1705786

The dipstick is inserted in the guide tube to measure the engine oil level. Length: 387.4 mm.

BMW Classic reproduction handle

Handle

Part number:
52 10 1904964

The handle of the seat back adjustment lever allows the user to fold it down and access the rear.

BMW Classic reproduction holding strap

Holding strap

Part number:
71 11 1179443

The holding strap keeps the toolbox in a horizontal position when opened.

BMW Classic reproduction oil pan upper part

Oil pan upper part

Part number:
11 13 1308358

The oil pan on the E30 M3 consists of 2 parts. The oil pan shown here is the upper part of the oil pan which is screwed directly onto the engine block. The lower part of the oil pan is screwed onto the lower part.

BMW Classic reproduction rear side panel

Rear side panel

Part number:
41 00 1943993 (left)
41 00 1943994 (right)

The side panel is a part of the chassis at the rear of the vehicle.

BMW Classic reproduction rear spoiler prime coated

Rear spoiler prime coated

Part number:
51 71 1967950

The rear spoiler is mounted on the boot lid and provides better driving dynamics through more downforce on the rear axle.

BMW Classic reproduction sliding jaw

Sliding jaw

Part number:
54 12 1933550

The sliding jaws on the sunroof are used to guide the sunroof cover in the sliding rails.

BMW Classic reproduction tailpipe trim black

Tailpipe trim black

Part number:
82 11 9401503 (50 mm)
82 11 9401457 (60 mm)

The tailpipe trim embellishes the rear exhaust pipe.

BMW Classic reproduction tailpipe trim chrome

Tailpipe trim chrome

Part number:
82 11 9401506 (45 mm)
82 11 9401091 (52 mm)
82 11 9413987 (58 mm)
82 11 9401456 (60 mm)

The tailpipe trim embellishes the rear exhaust pipe.

BMW Classic reproduction tailpipe trim chrome

Tailpipe trim chrome

Part number:
82 11 9413974 (42 mm)
82 11 9413968 (46 mm)
82 11 9413967 (51 mm)
82 11 9413970 (79x62 mm)

The tailpipe trim embellishes the rear exhaust pipe.

BMW Classic reproduction upholstery cloth

Upholstery cloth

Part number:
51 92 8106976 (0305, 0380 silver)

The upholstery fabric was reissued using original samples. With the new fabric, it is possible to have worn seat covers repaired by an upholsterer.

Reproductions for E31.

BMW E31

E31

There was a great rush for the BMW 8 Series following its presentation at the IAA in 1989. Its sporty and powerful design language, along with the high-performance eight- and twelf-cylinder engine, ensured its long-lasting status as a “fan favourite”. The series includes the following models: 840Ci, 840i, 850Ci and 850CSi.

BMW Classic reproduction clamp for sunroof baffle

Clamp for sunroof baffle

Part number:
54 12 1938391

The baffle clamp secures the sunroof cover to the baffle.

BMW Classic reproduction clutch disk

Clutch disk

Part number:
21 21 1223410 (850 CI)
21 21 2227157 (850 CSI)

The clutch disc enables smooth and gentle gear changes with ultimate driving dynamics.

BMW Classic reproduction cross reinforcement

Cross reinforcement

Part number:
31 11 1140614

The cross reinforcement contributes to driving stability in the front axle.

BMW Classic reproduction pressure plate

Pressure plate

Part number:
21 21 1223408 (850 CI)
21 21 2228106 (850 CSI)

The pressure plate separates and connects the gearbox with the engine in a force-fit manner.

BMW Classic reproduction tailpipe trim black

Tailpipe trim black

Part number:
82 12 9401297 (65 mm)

The tailpipe trim embellishes the rear exhaust pipe.

BMW Classic reproduction tailpipe trim chrome

Tailpipe trim chrome

Part number:
82 12 9401296 (65 mm)

The tailpipe trim embellishes the rear exhaust pipe.

BMW Classic reproduction tailpipe trim chrome

Tailpipe trim chrome

Part number:
82 11 9401152 (79x62 mm)

The tailpipe trim embellishes the rear exhaust pipe.

Reproductions for E32.

BMW E32

E32

The second generation of the BMW 7 Series was created using state-of-the-art computer-aided design methods. It made a strong impression right from the outset thanks to an atypically compact and sporty design for a luxury class car. The series includes the 730i, 730iL, 735i, 735iL, 740i, 740iL, 750i and 750iL.

BMW Classic reproduction clamp for sunroof baffle

Clamp for sunroof baffle

Part number:
54 12 1938391

The baffle clamp secures the sunroof cover to the baffle.

BMW Classic reproduction holding strap

Holding strap

Part number:
71 11 1179443

The holding strap keeps the toolbox in a horizontal position when opened.

BMW Classic reproduction tailpipe trim black

Tailpipe trim black

Part number:
82 11 9401505 (55 mm)
82 12 9401297 (65 mm)

The tailpipe trim embellishes the rear exhaust pipe.

BMW Classic reproduction tailpipe trim chrome

Tailpipe trim chrome

Part number:
82 11 9401152 (79x68 mm)

The tailpipe trim embellishes the rear exhaust pipe.

BMW Classic reproduction tailpipe trim chrome

Tailpipe trim chrome

Part number:
82 11 9401504 (55 mm)
82 12 9401296 (65 mm)

The tailpipe trim embellishes the rear exhaust pipe.

Reproductions for E34.

BMW E34

E34

In 1988, the third generation of the BMW 5 Series introduced a completely new development for the series. Outstanding aerodynamics (Cw value 0.30), modern technology and impressive workmanship were among the features that made this saloon the most successful of the series. The models 518i, 520i, 525i, 525ix, 530i, 535i and 540i, as well as the M5 3.6 and M5 3.8, belong to the E34 series.

BMW Classic reproduction clamp for sunroof baffle

Clamp for sunroof baffle

Part number:
54 12 1938391

The baffle clamp secures the sunroof cover to the baffle.

BMW Classic reproduction tailpipe trim black

Tailpipe trim black

Part number:
82 11 9401505 (55 mm)
82 11 9401457 (60 mm)

The tailpipe trim embellishes the rear exhaust pipe.

BMW Classic reproduction tailpipe trim chrome

Tailpipe trim chrome

Part number:
82 11 9401164 (48 mm)
82 11 9401506 (45 mm)
82 11 9401091 (52 mm)
82 11 9401504 (55 mm)
82 11 9401456 (60 mm)

The tailpipe trim embellishes the rear exhaust pipe.

Reproductions for E36.

BMW E36

E36

At the end of the 1990s, BMW introduced the third generation of the BMW 3 Series. The number of model variants made during its production cycle up until 1999 far exceeded its predecessor. The coupé followed in 1992 and the convertible in 1993. The following models make up the E36 series: 316i, 318i, 318is, 320i, 323i, 325i and 328i, as well as M3 and M3 3.2.

BMW Classic reproduction guide tube

Guide tube

Part number:
11 11 1740044

The dipstick is inserted in the guide tube to measure the engine oil level.

BMW Classic reproduction light switch button

Light switch button

Part number:
61 31 1387052

The light switch button is used to switch the light on and off.

BMW Classic reproduction rubber pad

Rubber pad

Part number:
82 24 0000618 (Paar, links & rechts)

The distance rubber or rubber pad serves as a base for the wind deflector in the convertible so that it does not rattle or chafe while driving.

BMW Classic reproduction tailpipe trim black

Tailpipe trim black

Part number:
82 11 9401503 (50 mm)
82 11 9401457 (60 mm)
82 12 9404731 (63x53 mm)
82 11 9401211 (68x52 mm, 125 mm)

The tailpipe trim embellishes the rear exhaust pipe.

BMW Classic reproduction tailpipe trim chrome

Tailpipe trim chrome

Part number:
82 12 9402865 (50 mm)
82 12 9404501 (55 mm)
82 12 9408593 (55x51 mm, 71 mm)
82 11 9401212 (58x48 mm, 125 mm)
82 12 9404730 (63x53 mm)
82 11 9401210 (68x52 mm, 125 mm)

The tailpipe trim embellishes the rear exhaust pipe.

BMW Classic reproduction tailpipe trim chrome

Tailpipe trim chrome

Part number:
82 11 9401456 (60 mm)

The tailpipe trim embellishes the rear exhaust pipe.

Reproductions for E38.

BMW E38

E38

The third generation of the 7 Series set new milestones in terms of comfort, safety and optimised fuel efficiency. For the first time, the saloon was also offered with two eight-cylinder diesel engine options, making it one of the world’s most powerful passenger cars. The models 728i, 728iL, 730i, 730iL, 735i, 735iL, 740i, 740iL, 750i and 750iL belong to the E38 series.

BMW Classic reproduction holding strap

Holding strap

Part number:
71 11 1179443

The holding strap keeps the toolbox in a horizontal position when opened.

BMW Classic reproduction grommet

Grommet

Part number:
61 66 8360138

The grommet is used to attach the windscreen washer system reservoir.

Reproductions for E39.

BMW E39

E39

Within the BMW 5 Series, the BMW 520i marked the entry into the world of six-cylinder petrol engines. The model continues to gain popularity today thanks to its variable valve timing system (VANOS) and light-alloy chassis. The series includes the 520i, 523i, 525i, 528i, 530i, 535i, 540i and M5 models.

BMW Classic reproduction grommet

Grommet

Part number:
61 66 8360138

The grommet is used to attach the windscreen washer system reservoir.

BMW Classic reproduction tailpipe trim chrome

Tailpipe trim chrome

Part number:
82 12 9408598 (56x74 mm, 130 mm)

The tailpipe trim embellishes the rear exhaust pipe.

Reproductions for Z1.

BMW Z1

Z1

BMW Technik GmbH quietly developed a futuristically styled two-seater sports car with plastic bodywork almost to the point where it was ready for series production. This Z1 Roadster aroused so much interest that BMW started a small series in mid-1988. A total of 8000 vehicles were produced.

BMW Classic reproduction ball joint

Ball joint

Part number:
51 21 2291423

The ball joint in the door of the Z1 is a connecting element for the door.

BMW Classic reproduction holding strap

Holding strap

Part number:
71 11 1179443

The holding strap keeps the toolbox in a horizontal position when opened.

Reproductions for Z3.

BMW Z3

Z3

The Z3 was first presented at the Detroit Motor Show in 1996 and caused a sensation which only grew after it became a James Bond car in “GoldenEye”. In addition to the 1.8-litre model, the BMW Z3 1.9 Roadster (until 1999) was the second 4-cylinder model in the range. The Z3 1.8, Z3 1.9, Z3 2.0, Z3 2.2i, Z3 2.5, Z3 2.5i, Z3 2.8, Z3 3.0i and Z3M3.2 models make up the Z3 series.

BMW Classic reproduction supporting bracket left

Supporting bracket left

Part number:
11 81 2229779

The supporting bracket or engine mount is the connection between the front axle carrier and the engine block.

BMW Classic reproduction tailpipe trim black

Tailpipe trim black

Part number:
82 12 9405005 (47x94 mm, 90 mm)

The tailpipe trim embellishes the rear exhaust pipe.

BMW Classic reproduction tailpipe trim chrome

Tailpipe trim chrome

Part number:
82 12 9405003 (47x94 mm, 90 mm)
18 12 9416186 (53x113 mm, 90 mm)

The tailpipe trim embellishes the rear exhaust pipe.

BMW Classic reproduction tailpipe trim chrome

Tailpipe trim chrome

Part number:
82 12 9408593 (55x51 mm, 71 mm)

The tailpipe trim embellishes the rear exhaust pipe.

Reproductions for Z8.

BMW Z8

Z8

In the mid-1990s, BMW began developing a superlative roadster for the new millennium – the Z8. First revealed to the public as the Z07 concept car in 1997, series production began in 1999 following the car’s cinematic debut as James Bond’s official car. A total of 5703 units of the Z8 were built.

BMW Classic reproduction grommet

Grommet

Part number:
61 66 8360138

The grommet is used to attach the windscreen washer system reservoir.

BMW Classic reproduction seat trim

Seat trim

Part number:
52 10 2280397 (left)
52 10 2280398 (right)

The seat trim is the side trim for the seat rails of the driver and passenger seats.

Reproductions for 1500-2000 CS.

BMW 1500-2000CS

1500-2000 CS

The BMW 1500 was the pioneer of a “New Class” that paved the way for BMW to become a successful and profitable automobile manufacturer. The saloon was presented for the first time at the IAA in Frankfurt in 1961. The series includes the following models: 1500, 1600, 1800, 1800ti, 1800tiSA, 2000, 2000C, 2000CS, 2000ti, 2000tii and 2000tilux.

BMW Classic reproduction cup for decorative frame

Cup for decorative frame

Part number:
51 31 7740158

The cup is the connection between the left and right trim frames on the pane.

BMW-Classic-PKW-nachfertigungen-1251348.jpg

Intake tube

Part number:
11 61 1251348

The intake tube is the connection between the intake tract and the intake manifold on the cylinder head.

BMW Classic reproduction latch striker

Latch striker

Part number:
51 21 1852263 (left)
51 21 1852264 (right)

The latch striker is attached to the body of the vehicle. The door lock fits into the latch striker.

Reproductions for 1502-2002 tii.

BMW 1502-2002tii

1502-2002 tii

An up-and-coming company, BMW really hit the big times with the models of the 02 Series. The two-door 02 Series expanded upon the four-door saloons of the New Class by offering a less expensive, yet no less attractive series. It quickly drove its way into the hearts of BMW drivers thanks to its own unique design, compact dimensions, sportiness and high quality. The following models make up the series: 1502, 1600, 1600ti, 1602, 1802, 2002, 2002ti, 2002tii and the 2002turbo.

BMW Classic reproduction catch with key (right)

Catch with key (right)

Part number:
51 21 6442101

The “catch with key” is the entire door handle including lock and key.

BMW Classic reproduction covering upper part

Covering upper part

Part number:
52 10 1853353 (left)
52 10 1853354 (right)

Seat covering for the reclining seat system in anthracite. The upper part of the seat covering hides the mechanism of the seat back.

BMW Classic reproduction filler pipe

Filler pipe

Part number:
16 11 1105714

The filler pipe is the connection between the tank filler neck and the fuel tank.

BMW Classic reproduction filler pipe

Filler pipe

Part number:
16 11 4480115

The filler pipe is the connection between the tank filler neck and the fuel tank.

BMW Classic reproduction hazard warning switch

Hazard warning switch

Part number:
61 31 1353428 (ECE version)
61 31 1355358 (US version)
61 31 1356193 (US version)

In the event of a breakdown, the hazard warning switch centrally activates all turn indicators to safeguard the breakdown area.

BMW-Classic-PKW-nachfertigungen-1251348.jpg

Intake tube

Part number:
11 61 1251348

The intake tube is the connection between the intake tract and the intake manifold on the cylinder head.

BMW Classic reproduction latch striker

Latch striker

Part number:
51 21 1852263 (left)
51 21 1852264 (right)

The latch striker is attached to the body of the vehicle. The door lock fits into the latch striker.

BMW Classic reproduction tailpipe trim chrome

Tailpipe trim chrome

Part number:
18 11 1102632 (55 mm)
82 11 9413970 (79x62 mm)

The tailpipe trim embellishes the rear exhaust pipe.

Page Overview: BMW Classic reproductions